# Bajaj Platina 100 — Full Specifications 2026

> Complete technical specifications for the Bajaj Platina 100.

Source: https://indianautoforum.com/bikes/bajaj/platina-100/specifications

The Bajaj Platina 100 is powered by a 102cc single-cylinder, air-cooled, two-valve DTS-i fuel-injected BS6 engine producing **7.9 PS @ 7500 rpm** and **8.34 Nm @ 5500 rpm**. The engine is paired with a 4-speed gearbox. ARAI-certified mileage is **84.36 kmpl** - one of the highest figures in the 100cc BS6 commuter segment.

The most technically distinctive specification is the **SNS (spring-in-spring) rear suspension** - a dual-spring setup where one spring sits inside the other, delivering a progressive ride response. On potholes and road undulations, the inner spring engages first, absorbing minor bumps softly; the outer spring takes over on larger impacts. The practical result is noticeably better pillion and rider comfort on rough surfaces compared to conventional twin-shock setups used by most rivals.

Front suspension is conventional telescopic forks. Kerb weight is **115 kg**. Seat height is **805 mm**. Fuel tank capacity is **11 litres**. Top speed is approximately 85-90 kmph.

## Brakes & Wheels
| Spec | Value |
|------|-------|
| Braking System | CBS |
| Front Brake | Drum, 130 mm |
| Rear Brake | Drum, 110 mm |
| Tyre Pressure (Rider & Pillion) | Front - 25 psi, Rear - 32 psi |
| Tyre Pressure (Rider Only) | Front - 25 psi, Rear - 28 psi |
| Tyre Size | Front - 2.75 x 17, Rear - 3.00 x 17 |
| Tyre Type | Tubed |
| Wheel Size | Front - 17 inch, Rear - 17 inch |
| Wheel Type | Alloy |

## Dimensions
| Spec | Value |
|------|-------|
| Fuel Tank Capacity | 11 litres |
| Ground Clearance | 200 mm |
| Kerb Weight | 117 kg |
| Overall Dimensions (LxWxH) | 2006 mm x 713 mm x 1100 mm |
| Reserve Fuel Capacity | 2 litres |
| Seat Height | 807 mm |
| Wheelbase | 1255 mm |

## Power & Performance
| Spec | Value |
|------|-------|
| Battery | 12V |
| Bore x Stroke | 47 mm x 58.8 mm |
| Clutch | Wet Multiplate |
| Compression Ratio | 9.5:1 |
| Displacement | 99.59 cc |
| Emission Standard | BS6 Phase 2 |
| Engine Type | 1 Cylinder, Air Cooled, 2 Valves |
| Fuel Type | Petrol |
| Gear Shifting Pattern | All 4 Down |
| Max Power | 7.79 bhp @ 7500 rpm |
| Max Torque | 8.34 Nm @ 5500 rpm |
| Mileage - Owner Reported | 75 kmpl |
| Riding Modes | No |
| Riding Range | 825 km |
| Spark Plugs | 1 Per Cylinder |
| Top Speed | 90 kmph |
| Transmission | 4 Speed Manual |
| Transmission Type | Chain Drive |

## Suspensions & Chassis
| Spec | Value |
|------|-------|
| Chassis Type | Tubular single down tube with lower cradle frame |
| Front Suspension | Hydraulic, Telescopic Type, 135mm travel |
| Front Suspension Preload Adjuster | No |
| Rear Suspension | 110 mm, Spring in Spring Suspension |
| Rear Suspension Preload Adjuster | No |

## Warranty and Services
| Spec | Value |
|------|-------|
| 1st Service | 500-750 km or 30-45 days |
| 2nd Service | 4500-5000 km or 240 days |
| 3rd Service | 9500-10000 km or 360 days |
| No. of Free Services | 3 |
| Vehicle Warranty | 75,000 km or 5 years |

Braking is handled by a **130mm front drum + 110mm rear drum with CBS** (ES Drum variant) or a **240mm front disc + 110mm rear drum with CBS** (ES Disc variant). CBS means applying the rear brake also partially applies the front brake - improving stopping distances for inexperienced riders. All Platina 100 variants are BS6-compliant with fuel injection. The bike runs on 17-inch alloy wheels.

## FAQs

**What engine does the Bajaj Platina 100 use?**
The Bajaj Platina 100 uses a 102cc single-cylinder, air-cooled, DTS-i fuel-injected BS6 engine producing 7.9 PS @ 7500 rpm and 8.34 Nm of torque @ 5500 rpm. It is paired with a 4-speed gearbox and produces 84.36 kmpl under ARAI testing.

**What is the SNS suspension on Bajaj Platina 100?**
SNS stands for spring-in-spring - a rear suspension design unique to Bajaj's Platina range. The inner spring handles smaller bumps softly; the outer spring engages under larger impacts. The result is a more progressive, comfortable ride on rough roads and potholes compared to the single-spring conventional shocks used on most rivals.

**What is the kerb weight and seat height of Bajaj Platina 100?**
The Bajaj Platina 100 has a kerb weight of 115 kg and a seat height of 805 mm. The 115 kg weight is higher than some rivals like the Honda CD 110 Dream (104 kg) but the low seat height makes it accessible for shorter riders.

**Does Bajaj Platina 100 get ABS?**
No - the Bajaj Platina 100 does not get ABS on any variant. It is equipped with CBS (combined braking system), which is the mandatory safety standard for motorcycles under 125cc in India. ABS is not offered even on the disc variant.

## More
- [Overview](/bikes/bajaj/platina-100)
- [Variants & Prices](/bikes/bajaj/platina-100/variants)
- [Price in India](/bikes/bajaj/platina-100/price)